Advertisements
BTNHD News

Building and Deploy an Image for Windows 10 on Windows Imaging and Configuration Designer

windowsICD_wp_header What's the purpose of Windows ICD? Well, Windows Imaging and Configuration Designer (ICD) is a tool to streamline the customization and provisioning of a Windows image. You can use Windows ICD to do the following tasks:

  • View all of the configurable settings and policies for a Windows 10 image or provisioning package.
  • Create Windows provisioning answer files.
  • Add third-party drivers, apps, or other assets to an answer file.
  • Create variants and specify the settings that apply to each variant.
  • Build and flash a Windows image.
  • Build a provisioning package.

Windows ICD is primarily designed for use by:

  • OEMs, ODMs, and Makers looking for a simple and streamlined process of creating and deploying a Windows image.
  • System integrators who provision devices based on their customers’ needs.
  • IT departments for business and educational institutions who need to provision bring-your-own-device (BYOD) and business-supplied devices.

Step 1: Create a folder so all of your ICD images/packages can be stored into. I created one in the C drive for now, but I would recommend dropping it into another partition.
Step 2: Inside the ICD folder I created subfolders for each of my custom ICD packages. You don’t have to do this, but I want to keep myself organize. Step 3: Get a copy of the Windows Operating System you will be customizing. I was able to download the ISO file of Windows 10 from the Microsoft site.
Step 4: If you get an ISO file make sure to extract all the content inside the ISO file to a folder. You will be needing this soon. Step 5: Locate and open up the Windows ICD Designer.
Step 6: Click on the “New Windows Image Customization” Step 7: Give your Project a name and change the location of the project folder.
Step 8: Their will be only one option enabled and that’s “The Windows image is based on a Windows image (WMI) file”. Click on Next to continue. Step 9: Click on Browse and locate the folder where the Windows Operating System files are in.
Step 10: Go inside the folder and click on “sources” Step 11: Locate and select the “install.wim” file and open it.
Step 12: You will then have to pick which WIM image you will want to customize within Windows ICD Designer. Step 13: If you have a provision package already you can import it now. Click on next to continue.
Step 14: Windows ICD Designer is loading the Windows OS WIM image. (Grab a cup of tea :)) Step 15: Once the WIM image is loaded you get many option to start customizing your package.
Step 16: Click on the “All Settings” drop down menu. Step 17: You have only two main options to start with. Windows ICD designer will give you “Common OEM settings” & “Common IT Pro Settings“. Lets pick “Common IT Pro Settings
Step 18: Within the “Common IT Pro Settings” you have many options. Take some time and go over some of the options to fit your environment.  Step 19: Then pick “Common OEM Settings” > OEM Settings only has two root options to configure.
Step 20: Expand each node and look around and see what you will need to configure for your environment.  Step 21: Once your customization is done you will then have to Build the project, so you can implement it. Click on Next to continue.
Step 22: From here you are able to encrypt the package, but make sure you write the encryption password if you picked this option. Click on Next to continue. Step 23: Browse for a new location or leave the default. After that click on Next to continue.
Step 24: Time to wait for the provisioning package to build. (Grab a cup of tea) Step 25: When the package is completed make sure to write down the path of where the provisioning packages are stored.
Step 26: Time to create your media. Windows ICD designer gives you three options. Click on “Create” and pick your poison. For this article and video we will be doing the “Production Media” option. Step 27: Production Media will give you two options. I will be doing a WIM image file.
Step 28: I would recommend enabling the compact OS option. It will try to make the media smaller, making it easy to store or create a bootable USB drive for mobile deployment. Step 29: Configuring the “Audit Mode Boot” is optional, so I left it alone for now.
Step 30: You are able to create the bootable USB drive on the spot, but I haven’t tested this out yet, so I will save my media content to a folder. Step 31: Pick a location where you want the media files to save into.
Step 32: I’m dropping it inside the ICD image folder I created earlier. Click on Next to continue. Step 33: Click on “Build” (Grab a cup of tea)
Step 34: That’s it! All done. Make sure to write down the output and project folder locations.

Advertisements
About BjTechNews (867 Articles)
An IT guy trying to learn everything about technology and sharing it with you all. I'm a blogger and video blogger who highlights daily news in the tech industry, promoting tips and hacks for fellow techies.

11 Comments on Building and Deploy an Image for Windows 10 on Windows Imaging and Configuration Designer

  1. vandreytrindade // December 18, 2015 at 1:40 pm // Reply

    Hi,
    I have a MCT ISO file… and it have a Install.esd file inside. How to do it?

    • I haven’t tested with MCT file as of yet. I would recommend seeing if Windows ICD will allow you to open up the install.esd file within the designer. If not, you have to get the install.wim file to customize your Windows 10 build.

  2. where do you get ICD to be able to do all this magical stuff? Thanks

    • you can get the Windows ICD within the Windows 10 ADK installation here is the link to get Windows 10 ADK -http://go.microsoft.com/fwlink/p/?LinkId=526740 – make sure you pick the option to install Windows 10 ICD

  3. I dunno where to get a windows 10 image with WIM, what i can download has install.esd so ICD cannot be used…

  4. Hi,
    We are trying to deploy Windows 10 to workstation and laptops. We are utilizing Azure AD to join the domain and Airwatch MDM to push most SAS applications and GPO. However, some applications still needed to install locally. I was trying to research many different ways to deploy the image including ICD and MDT. (Watching your video ^^ thanks!)
    Is there a way I can capture the golden image with few applications been manually installed using ICD? Do you have a video showing how to use ICD to install the application? eg: Office 2016, Citrix receiver, etc….. (I am confused because the ICD tool asks for package path which is .appx file not a .exe or msi file)

    Thanks!

  5. Mohammad Roni // March 24, 2016 at 4:26 am // Reply

    Hi
    I tried to follow your instruction. But found that my source folder has install.esd not install.wim file. How can I add the install.esd file to my build.
    Thanks
    Mohammad

  6. Very nice videos 🙂 thanks for the good work!
    oh, and if you need to install classical Win32 Apps like office or any other, i’ve posted a field feedback, as we had to do it for a client…not that simple though 🙂
    https://redkaffe.com/2016/07/30/english-windows-10-masterless-field-experience-part-1/
    other posts available on ICD but no translation to English ATM…will do that this week 🙂
    but even with french instructions, it gets the job done. Integration Office365 within the PPKG and installing a few other apps (7zip, Adobe, etc…)
    best ragrda from france,
    PierrE.

  7. When I deploy this .wim with SCCM for Windows Enterprise-N 1607 if images the machine successfully, but it doesn’t apply any of the changes…If I make a Provisioning and apply it, it gives me the same error…. I get an error code 0x800700b7 . Any Ideas?

  8. I love the videos! I cannot find how to take the image I built in WICD and deploy it with WDM that you referenced to in the end of the WICD video.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s